環保在線>產品庫>信息化管理|電子設備>傳感器>位移傳感器>>微型電容位移傳感器

微型電容位移傳感器

參考價

面議

具體成交價以合同協議為準

公司名稱深圳市勤聯科技有限公司
品牌
型號
所在地
廠商性質其他
更新時間2023/8/11 22:30:11
訪問次數240

產品標簽:

在線詢價收藏產品點擊查看電話

索取相關資料

公司介紹主營產品

深圳市勤聯科技有限公司 santek company ltd ，致力于引進國外測量技術，基于進口感測器與儀器儀表，測量技術、應力應變測試技術，無線網路技術及工控，巖土領域，集研究、開發、銷售、培訓、系統集成、技術支援、售后服務為一體的高科技產業公司。隨著國內制造業整體升級，人力成本提升，需要大量高精度，自動化，高可靠性的感測器及測試測量設備，我們有著更大的發展機遇并給客戶提供更加專業化服務。　　　　　　　我們的產品目前廣泛運用于高校研究院，工業設備，電子業，太陽能設備，半導體業，汽車電子，航天航空，鐵路與公路測量，橋樑與高層建筑監測等等。　　主要品牌：總代理：MTI，AEC,SAK，SONIC，KYOWA，RUFF，MIDORI，HONTKO 一級代理：SHOWA, NDK，KAIJO，CITIZEN，Microstrain 非接觸測量（激光/光纖/電容/電渦流位移傳感器，位移、振動、厚度、距離、尺寸測量），光譜共焦位移傳感器（可測多層透明薄膜），二維/三維激光掃描儀、多普勒激光振動計應變片、應力測試儀、稱重傳感器、放大器、加速度計、扭力計、壓力傳感器原位拉伸臺（微型拉伸試驗臺，可配合掃描電鏡/顯微鏡使用）無損檢測儀、風速計、流量計、地震警報器、工業內窺鏡電位器、編碼器、陀螺儀、記錄儀、數據采分析儀、無線發射接收地震警報器、土木方面用傳感器及其他土木工程檢測：大廈、大壩、橋梁、鐵路監測系統 PCB板應力測試：ICT、分板、螺絲鎖緊、疲勞試驗、跌落試驗、熱應變片

展開顯示更多內容

產品簡介在線詢價

微型電容位移傳感器

微型電容位移傳感器產品信息

微型電容位移傳感器

AccumeasureTM Capacitance Probes for AccumeasureTM D series

MTI Instruments Flat Capacitance Probes for Grounded Targets

MTI’s flat capacitance probe series. The thin probes may be used as is or bonded to a flat plate with mounting holes. Applications include single ended and double sided gap measurement such as commutator gaps, automotive and aviation assemblies.

Optionally, probes can be ordered bonded to a flat steel plate with 4X countersunk screw holes for conventional fastener attachment.

General Specifications for Flat Probes

Push Pull Flat Probes for Ungrounded Targets

Standard capacitive sensors require the target to be electrically grounded. Current flows from the probe face to the target and back to the amplifier to complete the circuit. The capacitance between probe and target is proportional to the distance and converted to a 0 - 10V output from the amplifier. The measurement of electrically grounded targets can be, however, affected by changes in the electrical conductivity or ground path of the target.

To eliminate the effects of these variations, MTI developed a unique version of the Accumeasure sensor called the push-pull. In this design each probe consists of two capacitance sensors, built into one probe body. Each sensor is driven at the same voltage; however, there is a 180 degree phase shift between signals. This shift allows the current path to travel across the target surface rather than through the target to ground, eliminating any inaccuracies created by poorly grounded targets.

General Specifications for Flat Push Pull Probes

Probe Recommended Stand-off Ranges

Optional Accessories

Flat probes can be bonded back to back and inserted into a handle (8000-6443) or used stand-alone to make thin gap probes. Additionally, a shim may be bonded between the probes for added stiffness.

Contact MTI sales with your requirements for measuring roller or die slots.

MTI has custom capability to design and manufacture a variety of probes to suit unique applications. This flat probe design capability allows for relatively inexpensive probes when produced in quantity.

MTI’s back-to-back push-pull probes can work as gap probes on ungrounded targets. These probes require a four channel amplifier such as the Digital Accumeasure D400 to operate.

Unmounted Probe Bonding Instructions

The probes can also be bonded back to back on a thin SS tab for insertion into slots or gaps.

關鍵詞：電源IC

微型電容位移傳感器

相關 技術 文章 >

該廠商其他產品 >

咨詢中心

對比欄

提示

微型電容位移傳感器

相關 技術 文章 >

該廠商其他 產品 >

咨詢中心

對比欄

提示

客戶評價列表

該廠商其他產品 >