FAT-TA系列單級單作用氣動增壓泵

詳細介紹

氣動增壓泵利用大面積活塞端的低壓氣體驅動而產生小面積活塞端的高壓流體。可用于壓縮空氣及其它氣體，輸出氣壓可通過驅動氣壓無級調節。

The pneumatic booster pump is driven by the low-pressure gas at the large area piston end to produce the high-pressure fluid at the small area piston end. It can be used for compressed air and other gases. The output air pressure can be steplessly adjusted by driving air pressure.

該系列泵的驅動活塞直徑為160mm，為單作用泵，所有單作用泵泵頭均帶有排氣冷卻

The drive piston diameter of this series of pumps is 160mm, which is a single acting pump. All single acting pump heads are equipped with exhaust cooling

注：PA進氣壓力 PB輸出壓力 PL驅動氣壓

氣動增壓泵技術參數：

Technical parameters of pneumatic booster pump:

小提示：壓縮比=大活塞面積/小活塞面積=輸出壓力/驅動壓力      

Tip: compression ratio = large piston area / small piston area = output pressure / drive pressure

縮小：      PL=驅動壓力            PA=泵入口壓力               PB=輸出壓力

Reduction:  PL = driving pressure    PA = pump inlet pressure      Pb = output pressure